Minimum Order Quantity: 10 Litre
We are looking for Whole Sellers /Retailers/Traders GUARD-cop is an environmental friendly true copper nutrient supplement cum shield against fungal & bacterial disease for crops which is required in ultra low dose of elemental copper avoiding copper deposition, contains active ingredients 10 % copper(cu).GUARD-cop is a non-systemic preventative fungicide/bactericide.Yes! I am Interested
It Works on both Downy and Powdery Mildew. Once mixed with water, GUARD-cop forms a shield gel with its in built spreading and sticking ability, gives a unique micro-thin cover of copper hydroxide crystals on to the plant leaf surface. As the median particles sizes for crystalline coppers of GUARD-cop is 0.3 micron whereas normal copper are 0.7-3.1 micron hence GUARD-cop has high efficacy over the others in the same segment
GUARD COP 2.5 lit/Ha singly . 1.5 lt Guard COP with 1 kg Mancozeb /Ha
MSDS Material Safety Data Sheet Effective Date: 6.5.2018 Product : SLEEP WELL Copper 10% Nutrient Fungicide Curative 100 ml Trade Name :GUARD COP HS code: 310100 Use : Plant Nutrient
SUPPLIER NAME: AMIT BIOTECH , un it 21, 3rd flr , 21, ballygunge circular rd., Kolkata- 700019 MANUFACTURER: AMIT BIOTECH , un it 21, 3rd flr , 21, ballygunge circular rd., Kolkata- 700019 SUPPLIER PHONE: :91-33-40084152 EMERGENCY PHONE:91-33-40084152 SUPPLIER FAX: :91-33-40084152 CHEMICAL FAMILY :Copper
Danger - this product is corrosive to the skin and may cause skin burns. Danger - this product is corrosive and may cause eye damage. Harmful - may be harmful if swallowed, inhaled or absorbed through the skin. Harmful - may cause skin sensitization from prolonged skin contact. Avoid skin contact. Harmful - may cause organ damage from repeated oral exposure at high doses. Very toxic to fish/aquatic organisms with long-lasting effects. Avoid contamination of any water supply with product or empty container. Toxic to terrestrial vertebrates [birds].
EYE CONTACT: Immediately flush with flowing water for at least 15 minutes. Seek medical attention if irritation persists. SKIN CONTACT: Wash with plenty of soap and flowing water for at least 15 minutes while removing contaminated clothing. DO NOT scrub skin. Wash clothing before reuse. INHALATION: If ill-effects occur, move to fresh air. If ill-effects persist, consult a doctor. INGESTION: If swallowed, rinse mouth with water immediately. DO NOT induce vomiting. Seek medical attention. NOTES TO DOCTOR: No specific antidote. Treat symptomatically.
EXTINGUISHING MEDIA: Dry chemical, water spray (fog), foam or carbon dioxide. THERMAL DECOMPOSITION PRODUCTS: None. SPECIAL FIRE FIGHTING METHODS None. UNUSUAL FIRE OR EXPLOSION HAZARDS:None.
Spills may be slippery and should be cleaned up immediately. Clear area of unnecessary personnel. Use appropriate protectiveequipment. Large spill: Dike and pump as much as possible to a salvage container. Absorb the remaining liquid and any small spills with claygranules, sand or other absorbent material and sweep to a wastecontainer. Cover the spill area with water and absorb. Minimise runoffinto waterways or drains. It may be disposed of as an industrial waste in a manner acceptable to good waste management practice in aland fill and in compliance with all regulations.
EXPOSURE LIMITS: No exposure limits (WES, TEL, or EELs) have been specifically assigned for this product. EYE PROTECTION: Chemical goggles or face shield where splash may occur. RESPIRATORY PROTECTION: Not normally required. Exceptions: during the formation of mists or aerosols or in the case of fire. PROTECTIVE CLOTHING: Avoid skin contact. If skin contact or contamination of clothing is likely, protective clothing [imperviousgloves, overalls and boots] should be worn. Wash protective clothing daily after work. VENTILATION: General (mechanical) room ventilation is considered satisfactory HYGIENE PRECAUTIONS: Do not eat drink or smoke while working with this product. Remove clothing that becomes soaked orcontaminated and wash before reuse. Wash hands before breaks and after work. The use of a skin barriercream is useful to give additional skin protection.
EXPLOSION PROPERTIES: Not applicable. SOLUBILITY: 8 – 9 AUTOIGNITION TEMP: DENSITY: VAPOUR PRESSURE: Not available. OTHER DATA: BOILING POINT: Not available. DECOMPOSITION TEMP: FLASHPOINT: Not applicable. OCATANOL / WATER PARTITION COEFFICIENT: pH: SETTING POINT: Not available.
MATERIALS TO AVOID: Do not store in steel containers. HAZARDOUS DECOMPOSITION None.
ACUTE INHALATION: No specific data. 6.1D; Harmful - may be harmful if swallowed, inhaled or absorbed through the skin. 6.5B; Harmful - may cause skin sensitization from prolonged skin contact. Avoid skin contact. 6.9B: Harmful - may cause organ damage from repeated oral exposure at high doses. 8.2C; Danger - this product is corrosive to the skin and may cause skin burns. 8.3A; Danger - this product is corrosive and may cause eye damage. Aquatic Toxicity: Very toxic to fish. Soil Toxicity: Not harmful to soil environment. Terrestrial Vertebrates - Birds: Toxic to birds. Terrestrial Invertebrates - Bees: Not harmful to bees. 9.1A; Very toxic to fish/aquatic organisms with long-lasting effects. Avoid contamination of any water supply with product or empty container. 9.3B; Toxic to terrestrial vertebrates [birds].
Triple rinse empty container and add rinsate to the spray tank. If recycling, discard cap and deliver clean container to an Agrecovery depot. Alternatively crush and bury in a suitable landfill. Dispose of product only by using according to this label, or at an approved disposal facility. Avoid contamination of any water supply or stream with product or empty container.
Proper Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S UN Hazard Class: 9. UN Number: 3082 Packing Group: III Hazchem Code: 2X Additional Information: Contains Copper. Do not carry more than 1 L of this product on a passenger service vehicle. APPROVED HANDLER: This product must be under the personal control of an approved handler when:
However, it may be handled by a person who is not an approved handler if: - an approved handler is present at the facility where the substance is being handled; and - the approved handler has provided guidance to the person in respect to the handling of the product; and - the approved handler is available at all times to provide assistance if necessary. GUARD COP shall NOT be applied onto or into water. RECORD KEEPING: A written record of use is required if 3 kg or more of this product is used within 24 hours in a place where:
The information must be kept for a minimum of three  years.
The data given here is based on current knowledge and experience. The purpose of this safety data sheet is to describe the products interms of their safety requirements. The data does not signify any warranty with regard to the products' properties.
Product Additional Information: